START HERE
Give the alert its own OBS mixer channel. In this setup, track 1 carries the mic, game, and alert to the livestream. Track 2 carries just the mic and game to the local recording. The recording tab should save only track 2.
Give the browser alert its own mixer channel
- In the scene you send to Program, open the alert Browser Source → Properties and enable Control audio via OBS. Name the source Alerts. If music and alerts come from widgets on the same overlay URL, put the alerts on a separate overlay URL first. OBS gives each browser source one set of track assignments.
- Trigger one test alert from the provider. Close or mute any dashboard preview that also plays it. The Alerts meter should move once. Leave its output unmuted and start with its headphone monitor off. You can hear it locally later through a device that OBS does not also capture.
- Speak into the mic and play a game sound separately. Identify the mixer channel for each. If the alert also registers on Desktop Audio, mute that channel for a test. If the game goes quiet too, give it its own capture before removing the desktop route. On supported Windows systems, use per-game audio capture.
Send the alert to the live track only
Open Edit → Advanced Audio Properties. Use the numbered checkboxes on each source row to build these two mixes. These numbers work together as an example. If your profile already assigns track 2 to something else, choose an unused track for the clean mix and substitute that number throughout.
| OBS source | Track 1 · Live | Track 2 · Clean recording |
|---|---|---|
| Microphone | Checked | Checked |
| Game audio | Checked | Checked |
| Browser alerts | Checked | Unchecked |
On the Alerts row, clear tracks 2–6 for this example. To include a guest on both mixes, give their call audio its own source and check 1 and 2. Using the Alerts mute button would silence it on every output track.
- Open Settings → Output and set Output Mode to Advanced. On the Streaming tab, select Audio Track 1.
- On the Recording tab, choose Standard as the recording type, select Matroska Video (.mkv), and enable only audio track 2. Leaving track 1 enabled here saves a copy of the alert in the file, even when the player opens the clean track.
- If your Twitch replay should also omit alerts, enable the separate Twitch VOD Track in the Twitch streaming output settings and select the same clean track 2. The local recording selection alone does not configure Twitch. For different replay contents, assign the desired sources to another unused track and select that one for the VOD.
To map your live, recording, and Twitch VOD checkboxes together—and catch overlapping Desktop Audio before recording—use the OBS multitrack & Twitch VOD audio planner.
Listen to both mixes before going live
- For one rehearsal file, temporarily enable recording tracks 1 and 2. Say “mic,” play an identifiable game sound, then trigger an alert during a quiet moment. Change to another scene you use and repeat.
- Open the MKV in a player with an audio-track menu or solo the tracks in an editor. The first mix should contain all three events once. The second should contain the mic and game, with silence during the alert. Hearing the clean mix first can hide a mistake on the other track.
- Return to Output → Recording, clear 1, and leave 2 checked. Make a second file. It should contain one audio track with mic and game. A player may call it the first or only audio track even though it came from OBS track 2.
If you also need isolated mic or game tracks for editing, enable them after this check and listen to each one for the alert. During the broadcast, check the live player on a second device with headphones. If you enabled a separate Twitch VOD track, check the same moment in the archived replay.
Find an alert that still reaches the recording
First check the file’s track list. If track 1 was saved, fix the recording selection. If the alert is audible inside the clean mix itself, note the current settings, mute the Alerts output, and trigger the test again. An alert that still reaches the file has another path. Check a dashboard tab playing through Desktop Audio, an output capture listening to the monitoring headphones, a second alert widget in a nested scene, or speakers reaching the mic. Remove the extra path, restore the Alerts output, and rerun the two-file test.
Keep the alert animation out of saved footage
The normal OBS recording still shows the Program picture, including the alert animation. For clean gameplay video as well, keep the browser overlay above a separate game capture in the live scene. Exeldro’s Source Record plugin can record the underlying game capture to its own file. Add its filter to that capture, choose a recording path and mode, and use Different Audio to select clean track 2 if you want commentary with it. Trigger an alert and open the plugin’s file to check both the picture and the sound. Source Record setup and downloads.
Sources & version notes
Documentation checked November 18, 2026. Menu labels can vary across OBS Studio releases; verify both mixes with the two-file rehearsal above.