AUDIO GUIDE / GET CONNECTED

How to stream PC audio to an Android phone

Listen to Windows audio on Android over Wi-Fi with MicDrop. Install, pair, choose the right output, and troubleshoot the first connection.

START HERE

Install matching MicDrop builds on Windows and Android, pair them on your home network, then enable Play desktop audio on the phone. Start with the phone speaker before adding headphones.

What you need

MicDrop (free, open-source PC-to-phone Wi-Fi audio app) sends the sound playing through a Windows output to your phone. That makes the phone useful as a wireless listening device for a desktop PC, including a PC connected to the router by Ethernet. Both devices need to be able to reach each other; they do not both need Wi-Fi.

  • A Windows 11 x64 PC and an Android 12 or newer arm64 phone.
  • The Windows installer or portable ZIP and Android APK from the same MicDrop release.
  • A trusted local network. Guest Wi-Fi often separates devices and can prevent a connection.

The Android beta is installed from an APK, rather than Google Play. Allow installation from the source used to open that APK only for the installation, then turn that permission off. If security software blocks a package, record the detection and report it to the project; keep device protections enabled.

1. Start the Windows host

  1. Install MicDrop, or extract the complete portable ZIP to a folder and launch MicDrop.exe.
  2. Under Audio, set Desktop audio source to the output your music, game, or browser is actually using. A USB headset, HDMI monitor, and desktop speakers are separate outputs.
  3. Leave Phone microphone destination on Disabled — desktop playback only for this first listening test.
  4. Under Connection, select your physical home-network adapter and address, save, and choose Start host. Permit MicDrop through Windows Firewall on your trusted Private network if prompted.

Play something on the PC and confirm that its normal output works. This gives you a known source before introducing the phone.

2. Pair the phone and listen

  1. Install the matching Android APK and open MicDrop.
  2. In the Windows app, choose Phones → Pair a phone.
  3. Scan the QR code in the phone app or paste the invitation link. Keep that invitation private; camera permission is only needed for scanning.
  4. Choose the phone speaker as the output, enable Play desktop audio, leave Send microphone off, and tap Connect on the phone.
  5. Compare the request ID shown on both screens and click Approve on Windows. Keep MicDrop open on the phone so playback starts right after approval (or tap Reconnect if you switched apps).

Raise the phone's media volume gradually. Once you hear clean audio, try pause, resume, and Stop. Then connect headphones to the phone and check which output MicDrop reports. Playback alone does not require microphone permission or a virtual audio cable.

3. Check the setup you will actually use

Listen for ten minutes with the phone speaker, then repeat with your usual headphones. Lock the phone for a separate background test. If only the headphone test has noticeable delay, investigate that route before changing the network. Bluetooth adds a second wireless audio path after the PC-to-phone connection.

For a silent connection, check Windows' per-app output and the selected host output first. For a missing host, use the connection checklist. If audio stops only after locking the screen, follow the Android background guide.

What this setup does and does not do

Local playback needs no MicDrop account or cloud service once installed. Keep the PC awake and the host running; only one phone audio session can be active at a time. Optional remote access is a separate setup. MicDrop is designed for low delay, but your output route and network determine the result: a working Bluetooth connection does not establish a particular latency.

Sources & version notes

Checked against the documentation below on November 13, 2026. App labels and platform support can change; use matching MicDrop builds and check the current release notes. These are setup guides, not new hardware benchmark results.