START HERE
Install matching Windows 11 and iPhone MicDrop builds (available via Apple TestFlight or sideloaded IPA), allow Local Network access on iOS, pair on your home network, and test the iPhone speaker before adding headphones.
Check the beta requirements first
You need a Windows 11 x64 PC, an iPhone with iOS 17 or newer, and matching builds of MicDrop (free PC-to-iPhone Wi-Fi audio app) from the MicDrop releases page. This route uses a desktop host and a phone receiver over WebRTC/Opus; it is not an AirPlay setup. (Using a Mac or Linux desktop instead? Follow the macOS guide or Linux guide.)
On iPhone, you can install the beta through Apple TestFlight (requiring only Apple’s TestFlight app from the App Store) or sideload the optional unsigned IPA from GitHub Releases using a compatible tool such as iloader or Sideloadly and your Apple ID. Free Apple ID sideload signatures normally need refreshing every seven days; see the iPhone installation instructions for both options.
The project has completed initial iPhone LAN playback/duplex and audio-session checks, while broader physical headset routes, locked-screen behavior, and remote validation remain underway. Treat your first session as a check of your own setup, especially when using Bluetooth headphones.
1. Install and prepare both ends
- Install the matching Windows setup package or portable ZIP. In MicDrop's Audio settings, set Desktop audio source to the Windows output playing the source audio.
- Select the physical home-network adapter in Connection, save, and choose Start host. Keep the PC awake.
- Install the matching MicDrop build on iPhone through TestFlight—or, if sideloading the unsigned IPA, complete Developer Mode, Apple ID signing, and certificate trust in Settings → General → VPN & Device Management.
- Open MicDrop on the iPhone and allow Local Network access when asked.
If that permission was denied, Apple places its controls under Settings → Privacy & Security → Local Network. Enable access for MicDrop and retry. Internet access working in Safari does not prove that an app can reach local devices.
2. Pair and establish speaker playback
- On Windows, open Phones → Pair a phone.
- Scan the invitation QR code on the iPhone or paste the pairing link.
- Choose the iPhone speaker, enable Play desktop audio, leave Send microphone off for the first test, and tap Connect.
- Compare the request ID shown on both screens and click Approve on Windows. Keep MicDrop open on the iPhone so playback starts upon approval, then test a familiar clip at low volume.
Check pause, resume, and Stop before adding another variable. Next try wired or Bluetooth headphones and confirm the effective output. If the speaker works and the headphones do not, concentrate on the phone's audio route rather than replacing the pairing.
3. Test interruptions and locked-screen use
Listen with the screen on, then lock it for a separate test. Record whether Low Power Mode was enabled, how long playback lasted, and whether an incoming call changed the route. iOS does not use Android's per-app Unrestricted battery setting; applying an Android optimization tutorial will not fix an iPhone route problem.
Keep the app version, iPhone model, iOS version, headphone model, and exact failure step in a report. A desktop CI build or simulator result cannot verify physical headphone behavior.
Microphone return and updates
To use the iPhone as a Windows microphone, follow the microphone guide and install a separate Windows virtual cable. Grant microphone permission on the phone when using that mode. Windows cannot grant it remotely.
For updates, keep Windows and the iPhone app on matching release versions. TestFlight updates preserve your pairing in place; when sideloading the unsigned IPA, keep the same Apple ID and bundle ID so saved state is retained (deleting the app removes its pairing, and an expired 7-day sideload signature prevents launching until refreshed).
Sources & version notes
Checked against the documentation below on November 15, 2026. App labels and platform support can change; use matching MicDrop builds and check the current release notes. These are setup guides, not new hardware benchmark results.