AUDIO GUIDE / GET CONNECTED

VB-CABLE setup: CABLE Input vs. CABLE Output

Understand the two ends of VB-CABLE, route MicDrop microphone audio into Windows apps, and avoid silence, monitoring loops, and mixed audio.

START HERE

Send sound into CABLE Input, the playback device. Receive that sound from CABLE Output, the recording device. Use the Windows audio routing helper for a step-by-step Discord or OBS checklist.

Why the names feel backwards

A virtual cable is a connection between applications, not a physical speaker or microphone. One application plays into it and another records from it. Windows groups the two ends by what an application can do with them.

The endpoint names from two perspectives
NameWindows device typeUse it in
CABLE InputPlayback/output deviceThe application sending audio
CABLE OutputRecording/input deviceThe application receiving audio

The name follows the cable: sound enters its Input and leaves its Output. For a phone microphone, MicDrop is the sender on Windows, even though the original sound came from a microphone.

1. Install the cable separately

Download VB-CABLE from VB-Audio's official page. Extract the package and follow the vendor's instructions for the appropriate Windows installer, administrator elevation, and restart. Review its license terms. MicDrop neither installs nor bundles this driver.

After installation, verify both endpoints appear in Windows sound settings. If you cannot see them, finish the driver setup before working on phone pairing. Applications opened before a driver installation may need reopening to refresh their device lists.

Restore your default speakers right after installing: VB-CABLE's installer often switches Windows' default playback device to CABLE Input and default recording device to CABLE Output, which makes desktop sound appear to vanish. Open Settings → System → Sound (or press Win + Ctrl + V) and set Output back to your physical speakers or headphones and Input back to your regular microphone (or use More sound settings → Playback / Recording → Set Default) before testing any app.

2. Assign the devices explicitly

  1. Stop the MicDrop host.
  2. In its Audio settings, set Phone microphone destination to CABLE Input.
  3. Keep Desktop audio source on the real output you want to hear. Do not select the return cable as that capture output.
  4. Save and start the host. On the phone, enable Send microphone and connect.
  5. In Discord, OBS, or your recording application, choose CABLE Output as the input.

You do not need to make the cable the system-wide default for this setup. Keeping application choices explicit makes it easier to avoid sending notification sounds, music, or other private desktop audio into a call.

3. Prevent an audio loop

Leave Windows Listen to this device off for the cable. In OBS or another mixer, avoid monitoring the cable into the same Windows output that MicDrop captures. Otherwise the returned microphone can travel back to the phone, re-enter an open microphone, or be recorded twice.

Use headphones for duplex tests and start with a short private recording. Verify normal speech, mute, and Stop. If your recording contains music from another Windows application, check whether that application also outputs to CABLE Input: applications sharing a cable can contribute audio to the same receiving side.

Troubleshoot at the cable boundary

If the phone is connected but the receiving app is silent, select CABLE Output in the browser microphone test to check whether audio is crossing the cable before debugging Discord or OBS. If one application receives sound correctly and another does not, inspect the second application's input selection and permissions next.

For distortion, start at a moderate microphone level and check for duplicate sources or stacked gain. Do not assume that changing a sample-rate label fixes every crackle. Keep a note of each change and revert changes that do not help. For multi-bus streaming mixes or sending OBS sound into a call, see Voicemeeter Banana into OBS, separating Discord audio in OBS, or routing audio with OBS Virtual Camera.

Sources & version notes

Checked against the documentation below on November 13, 2026. App labels and platform support can change; use matching MicDrop builds and check the current release notes. These are setup guides, not new hardware benchmark results.