FREE AUDIO TOOL / LOCAL MICROPHONE CHECK

Online microphone test.
Live level meter & playback.

Test a microphone, check its digital levels, and listen back to a short recording. Audio stays on this device.

Privacy-first & local-only: Your microphone audio, device names, measured levels, and optional 10-second test clip stay strictly in your browser tab—nothing is ever uploaded or retained by our server, and clips clear when you press Clear or leave the page. No accounts or ads; cookieless site stats count only anonymous page visits and tool starts. Website privacy details →

1. Check the input.

Start the test, allow microphone access, and speak normally. Additional input names appear after permission is granted. Stop the microphone to choose another input.

Enable JavaScript to use the microphone controls.

Mono-mixed RMS
—
Mono-mixed peak
—
Mono-mixed headroom
No active measurement

0 dBFS is digital full scale. Lower values leave more headroom; silence has no finite dBFS value. The indicator flags near-full-scale samples in the mono mix, which can accompany distortion. This is not a room-loudness meter or an automatic sound-quality score.

The meter mixes input channels to mono. On a stereo input, opposite-polarity channels can cancel, and a clipped individual channel can be hidden by the mix. The recording uses the original input stream and may retain stereo, depending on the browser. For per-channel measurements, open a compatible WAV file in the WAV inspector; this recorder does not promise WAV output.

Browser input settings will appear here after the test starts.

2. Hear a short sample.

Record up to 10 seconds, then listen back or download the clip. Playback stops microphone capture automatically so the test cannot record its own output.

Start the microphone test to enable recording.

No account, uploads, or live microphone monitoring. A clip is kept only in this tab, capped at 10 seconds and 5 MB. It is cleared when replaced, when you press Clear, or when you hide or leave this page. Download anything you want to keep. Recording format depends on your browser.

3. Compare quiet and speech.

Sample the room while quiet, then speak at your usual distance for a second sample. Compare the results after moving the microphone or adjusting input gain.

Start the microphone to compare samples.

These are approximate mono-mixed averages of the browser's input, with the same channel-cancellation limits as the live meter. Noise suppression, echo cancellation, and automatic gain can alter both samples. They are not a calibrated noise-floor measurement or a universal noise-gate setting.

What do the results mean?

  • No movement: check the selected input, hardware mute switch, browser permission, and operating-system microphone permission.
  • Very quiet speech: move closer, check the input gain, and confirm the browser opened the microphone you intended.
  • Repeated near-full-scale readings or distorted speech: reduce input gain or move back, then record again.
  • A meter that moves but a silent recording: check browser playback volume and the selected output. Try the headphone and stereo test.

Test a phone microphone through MicDrop.

On Windows, connect your phone in MicDrop with microphone sending enabled and route its microphone return into a virtual cable. Select CABLE Output as this browser's microphone, speak into the phone, and record a sample. The VB-CABLE guide explains why the receiving app uses Output while MicDrop sends into Input.

A successful browser test confirms this browser receives audio. Discord, OBS, and other apps have their own input selections and processing settings. Follow the Discord setup, OBS setup, or Windows microphone checklist if another app stays silent.

What is measured or saved?

The meter reads the signal exposed by your browser; it cannot inspect every operating-system mixer, driver, or audio route. This page does not upload audio, recordings, device names, or measured levels. The site's traffic analytics can record that the tool was started. Capture stops when you press Stop, press Escape, hide the tab, or leave the page.

Browser microphone access uses getUserMedia; local recording uses the MediaStream Recording API.

Common online microphone test questions

What dBFS level should my microphone reach when speaking?

Normal speech that lands comfortably below 0 dBFS—typically peaking somewhere around −18 to −6 dBFS without hitting full scale—leaves clean headroom for louder moments. Exact readings depend on browser automatic gain control, distance, and whether stereo inputs are mixed to mono.

Why is my microphone detected on Windows 11 but silent in the browser?

Check three places in order: the hardware mute button or boom arm on the headset, Windows Settings → Privacy & security → Microphone (including desktop browser access), and the site permission icon in your browser’s address bar.

Why can I hear myself with a delayed echo during a mic test or call?

A slightly delayed copy of your voice usually comes from Windows Listen to this device, OBS audio monitoring, or a second open mic test. Follow how to stop microphone echo or use zero-delay sidetone to isolate the loop.

Does this online mic test upload or save my voice recording?

No. Live levels and the optional 10-second playback clip stay in memory inside your browser tab, never touch a server, and are cleared automatically when you press Clear, hide the tab, or leave the page.