AUDIO GUIDE / COMPUTER AUDIO

No sound on a Mac? Check speakers, output, and app volume

Restore sound on a Mac by checking the selected output, app and tab volume, external displays, and connected audio devices before seeking service.

START HERE

Check the app’s volume, then choose the built-in speakers in System Settings → Sound → Output (or Sound in Control Center). Disconnect external audio routes for a clean comparison if the Mac keeps sending sound elsewhere.

1. Separate one silent app from a silent Mac

Play a familiar audio file, then try a different app or website through the same output. Check the app's volume and any mute control in the media player. In Safari, inspect the audio control for a muted page. If another app plays normally through the built-in speakers, those speakers are capable of producing sound.

Use the single-app troubleshooting guide if the failure stays with one browser or application. Keep the working app as your comparison instead of repeatedly changing system settings that already allow it to play.

2. Select the intended output

  1. Open the Apple menu and choose System Settings → Sound (or open Control Center → Sound in the menu bar).
  2. Under Output, select the built-in speakers, or the connected device you actually want to hear.
  3. Check output volume, mute, and left/right balance, then replay your test clip.

The output list can include a display, USB interface, headphones, AirPlay receiver, or Bluetooth device. Look at the selected name rather than assuming sound comes from the Mac because the video is on its screen. Older macOS versions may use the name System Preferences and a different layout.

3. Compare with external devices disconnected

For a built-in speaker test, disconnect headphones, USB audio devices, and external displays that can receive audio. Save your work before changing a dock connection. Select the built-in speakers again and replay the same clip.

If sound returns, reconnect one device at a time. Note which addition changes the route or brings back the problem. If a monitor becomes the selected output, check its manual for actual speaker support; an audio-capable display connection does not guarantee that the monitor contains speakers.

4. Check controls on external equipment

When you want to use an interface, display, or powered speakers, inspect its own volume and mute controls. Some output routes use volume controls on the destination rather than the Mac's keyboard keys. A disabled-looking Mac volume control alone does not tell you whether that destination can play audio.

Compare another output with the same app. If headphones work and the built-in speakers do not, keep that distinction in your notes. If only one side is audible, check balance where available and use the stereo test at a low level to repeat the comparison.

5. Do not confuse playback with microphone input

If you can hear a meeting but others cannot hear you, the output is working. In System Settings → Sound → Input, choose the intended microphone and observe the input level while speaking. Check the call app's input choice as well. Input volume and speaker volume control different parts of the conversation.

For an echo instead of silence, use the echo and monitoring guide. It separates local sidetone from a delayed return through meeting speakers.

6. Know when the result needs device support

If built-in speakers stay silent across apps with external devices removed and the correct output selected, follow Apple's support path below. Include your Mac model, macOS version, whether headphones work, and when the problem began. Those facts are more useful than a list of settings changed without a comparison.

These checks use built-in macOS controls—MicDrop does not repair silent hardware or driver faults. Once local playback works normally, see how to stream Mac audio to an Android phone or iPhone using MicDrop’s experimental Apple Silicon macOS 14.2+ beta host. If local playback works in headphones but OBS recordings stay silent, follow capturing Mac desktop and app audio in OBS.

Sources & version notes

Platform steps were checked against the official documentation below on November 15, 2026. Labels and available controls vary by operating-system version and device. Manufacturer examples apply to the named models; consult your own device manual for its options.