AUDIO GUIDE / COMPUTER AUDIO

Hear yourself in your headset? Fix microphone echo or toggle monitoring

Stop unwanted microphone echo—or turn self-monitoring on or off cleanly—across headset sidetone, Windows Listen to this device, OBS, and call apps.

START HERE

To stop hearing yourself: check your headset’s sidetone control for instant voice playback, or uncheck Windows Listen to this device if your voice sounds slightly delayed. To hear yourself on purpose: use hardware sidetone or a USB mic’s direct-monitor jack whenever available—software monitoring adds noticeable speech delay.

1. Tell sidetone, monitoring, and call echo apart

Leave the call and close recording apps. Speak while wearing the headset. Can you still hear an amplified version of your voice? Does it arrive immediately or after an obvious delay? Now compare with a short clip in the online microphone test (which pauses capture during playback so it cannot loop). This separates what you hear while speaking from what the microphone actually records.

These observations suggest different checks
What happensInvestigate first
Your own voice is audible immediatelyHeadset sidetone or an interface's direct monitor.
A delayed voice stays audible with apps closedWindows Listen to this device on a recording input.
A delayed voice appears when an app opensThat app's monitoring or microphone test playback.
Echo exists only in a meetingSpeakers feeding a microphone or a second joined device.
The saved recording has two voicesDuplicate capture sources or a monitoring loop.

2. Toggle headset sidetone or direct monitoring

Some headsets deliberately play a little microphone sound into your ears so speech feels natural in closed earcups. Manufacturers call this sidetone, and USB microphones or audio interfaces often provide a zero-latency direct monitor mix. If you want to hear yourself clearly while speaking, this hardware path is the right control to enable; if it sounds like hiss or unwanted room noise, lower or disable it in the device utility.

Sony's documentation below gives examples of headset sidetone and a model with an adjustable level. Setting names and options are device-specific. A voice heard only through local sidetone does not send an echo to other callers.

3. Turn Windows “Listen to this device” off (or on)

On Windows 11, an input can be routed directly to your speakers or headphones even when every voice app is closed. Open Settings → System → Sound → More sound settings, switch to the Recording tab, open your microphone's Properties → Listen, and uncheck Listen to this device to stop delayed self-echo (or check it temporarily for a quick mic test, then click Apply). Check any connected webcam or virtual-cable recording device there too.

On macOS, there is no system-wide “Listen to this device” checkbox, so unexpected self-monitoring usually comes from a USB microphone or audio interface's direct-monitor switch, an open app (such as GarageBand, Logic, OBS, or Discord) with input monitoring enabled, or a virtual routing utility. Also open Audio MIDI Setup and verify any interface-exposed Thru checkbox on input channels is unchecked, then close audio apps one by one to isolate the active monitor.

Next reopen audio apps one at a time. Check for a microphone test, monitoring, or “listen” option that plays the input back. Keep only the monitoring route you intentionally need. In OBS, review the source's audio monitoring and make a short recording to check the result.

A common diagnostic mistake is opening another live microphone test while the first one is still playing back. Close each test before starting the next. If you use a virtual cable, use the Windows audio routing helper to map which app writes to it and which app reads it; sending the received signal back into its own input can create a loop.

4. Fix echo heard by others in Discord, Zoom, or Teams

If the echo happens only in a call, check whether a phone and computer have both joined audio in the same room. Leave meeting audio on the extra device; muting only its microphone can leave a speaker path active. Use headphones for a simple comparison.

With the other person's agreement, mute one participant at a time and note when the echo stops. The returning copy of your voice may come from someone else's speakers and microphone. Zoom's echo guidance describes this isolation method. Changing your own microphone gain repeatedly will not identify a loop at the other end.

5. Confirm what callers or recordings actually hear

Test the saved recording or ask the other participant what they hear after each change. Do not judge a call solely by your local headset sound. Keep the same input and output selected during the comparison, then restore your normal setup one device at a time.

If you are routing a phone microphone into a Windows recording app, the OBS setup guide covers duplicate capture and monitoring checks for that route. The same habit applies: establish one clear path before adding another. For duplicate capture or headphone monitoring loops inside OBS Studio, continue with fixing OBS audio echo and the OBS audio monitoring guide.

Sources & version notes

Platform steps were checked against the official documentation below on November 13, 2026. Labels and available controls vary by operating-system version and device. Manufacturer examples apply to the named models; consult your own device manual for its options.