START HERE
First confirm that the monitor can play audio. A display can appear as a Windows playback device without having built-in speakers. Then check Windows output selection and the display’s own audio controls.
1. Confirm what the display can do
Look up the exact monitor model in its manual. Check for built-in speakers, a headphone output, or an audio line output. Those are different features. Some displays accept digital audio and pass it to a jack but do not contain speakers, so appearing in Windows' output list is not proof that the screen itself can make sound.
Follow the manual for the kind of equipment its jack accepts. If the display has no suitable playback hardware, choose your computer speakers or a headset instead. This check can save a long sequence of driver changes that cannot add missing speakers.
2. Select the display and its audio controls
- Connect and turn on the display. Open Settings → System → Sound on Windows 11.
- Under Output, select the intended monitor or TV. Its name may differ from the name printed on the front.
- Use the display's buttons or remote to check its audio mute, volume, and speaker/output choice.
- Play a familiar local clip or a low-volume 440 Hz tone in the online tone generator. Then check the app's output in Windows Volume mixer if only that app stays silent.
If you actually wanted sound from the laptop, select the laptop speakers again. The timing of a docking or HDMI connection often explains why sound seems to have moved, even though playback itself is still running.
3. Reduce the connection to a simple test
When practical, compare a direct PC-to-display connection with the dock or adapter path. Use a cable and port supported by both devices. HDMI and DisplayPort can carry audio, but the complete adapter chain and display still need to support your intended route; a working picture alone is not a sound test.
Keep the same app and clip for each comparison. Note whether the display remains in the output list when the problem occurs. If direct audio works and the dock path fails, investigate the dock's model-specific audio support and updates rather than replacing unrelated headset drivers.
4. If the display output is missing
Reconnect the display and check that Windows sees it. If video works but the audio output never appears, consult your PC or graphics-device support documentation for its display-audio driver. Dell's HDMI reference below explains the Windows playback and driver checks; other manufacturers may label their devices differently.
Do not remove every audio device to test one missing output. Record the monitor, GPU, dock, cable type, and whether the same setup worked previously. That information distinguishes a configuration change from a connection the hardware has never supported.
5. Keep playback and microphone paths separate
A conferencing monitor's speakers, webcam, and microphone may use different connections. A picture and HDMI sound do not establish that its microphone is connected. Follow the display's manual for any required USB upstream cable, then verify input levels in the online microphone test and the Windows microphone checklist.
If you prefer to listen through a phone instead of the display, PC-to-phone audio is another setup to explore once your Windows source is working. It is a separate listening route, not a display-driver repair. If the silent HDMI signal is feeding a capture card rather than monitor speakers, see capture card video works but no audio in OBS.
Sources & version notes
Platform steps were checked against the official documentation below on November 13, 2026. Labels and available controls vary by operating-system version and device. Manufacturer examples apply to the named models; consult your own device manual for its options.