START HERE
The Windows slider is only one volume control. Check the media player, Windows Volume mixer, and the speaker or headset itself, then compare another recording at a comfortable level.
1. Identify what is actually quiet
“Volume is at 100%” can refer to the system, an app, a video player, or a headset. Note which control you raised. Start a familiar recording and compare a second one using the same app and output. If the second recording sounds normal, the first file or stream may simply have a lower level—you can check a local WAV recording’s digital peaks in the WAV file inspector.
Return controls to a moderate level before switching to a different device or opening an unfamiliar clip. A correction can suddenly restore normal loudness. There is no need to use an unexpectedly loud test to determine whether the route works.
2. Check Windows and the app separately
- Open Settings → System → Sound → Volume mixer while the affected app is playing.
- Check the system level, the app's level, and its mute state.
- Confirm that the app's output is the device you are listening to.
- Check the player's own volume slider, then repeat the same passage.
For example, a browser video can have a low player level even when the browser and Windows sliders are high. Conversely, turning the video player up will not correct an app that Windows is sending to a different output. Change one control, listen, and keep track of the result.
3. Inspect the listening device
Check the physical wheel or buttons on the headset, powered speakers, monitor, or audio interface. Their behavior varies: some controls move the operating-system level, while others change the device's own level. Observe the Windows slider while adjusting the control rather than assuming how this model works. On Bluetooth headphones, Windows 11 normally uses Absolute Volume so the headset buttons and Windows slider stay synced, but some headsets and adapters keep an independent internal volume—raise the headset's own volume control while watching whether the Windows slider moves, and disconnect and reconnect Bluetooth if the two levels fall out of sync.
If one side seems quieter, run the left/right speaker test at its initial low setting. A channel imbalance can feel like a general volume problem. Inspect the output's balance controls if available, and compare another headset before deciding that the whole computer needs more gain.
4. Compare processing, call ducking, and a second output
On Windows 11, open the output device in Sound settings and try disabling Audio enhancements (and Spatial audio if enabled). Record the old value and restore it if there is no improvement. If music or games drop drastically in volume whenever a call or voice app is open, check Settings → System → Sound → More sound settings → Communications, where Windows can reduce other sounds by 80% during communication activity. Also compare the app's equalizer or volume-normalization setting with its default.
Try another output with the same recording. If laptop speakers are normal but one external device is quiet, check that device's controls and connection. If every app is quiet through several outputs, the Windows low-volume and driver references below provide the next platform checks.
5. Distinguish output level from recording level
A quiet microphone is an input problem. Raising speaker volume might help you hear a test recording, but it does not make your transmitted voice louder for other people. Check your input directly in the online microphone test and follow the microphone troubleshooting guide.
If adding gain makes audio louder but also harsh or broken, stop increasing it and investigate distortion. The useful result is intelligible, comfortable playback in your normal app. Verify it with both speech and music before keeping a change. If viewers tell you your stream or recording is still quieter than other channels, measure the actual broadcast tab or saved clip in the stream loudness & LUFS checker to see how many dB of OBS gain you need.
Sources & version notes
Platform steps were checked against the official documentation below on November 13, 2026. Labels and available controls vary by operating-system version and device. Manufacturer examples apply to the named models; consult your own device manual for its options.